Fiberglass Entry
Fiberglass Entry
UPP® brand electrofusion fiberglass entry boots allow you to seamlessly connect UPP® brand double wall semi-rigid pipework systems to fiberglass containment sumps.
Highlights
- Available in 2”, 3”, and 4” models for use with UPP® brand secondary contained pipework systems.
- Designed for use on single and double wall containment sumps, provided the wall thickness does not exceed the maximum thread width of each entry seal listed under the specifications tab (Not recommended for curved sump surfaces).
- Allows for electrofusion welding of secondary contained pipework directly to boot.
- Polyethylene sleeve is over-molded onto a center section with multiple dovetail grooves tying the two materials together to create a watertight joint.
Specifications
Installation
The boot’s flanges are bonded to the fiberglass sump wall with the adhesive kit (sold separately), creating a solid connection between the boot and sump wall. The flanges are then covered with adhesive. Once properly installed, the boot is fully vacuum and pressure testable.
Components
- Polyethylene sleeve
- Threads
- Compression disk (threading)
- Compression disk (fixed)
- Fiberglass sump wall
- Maximum thread width
Maximum Thread Width
This indicates the maximum width of the fiberglass sump wall the entry boot can accommodate.
| Model | Thread With |
| 2”Entry Boot | 1-3/64” (26.5mm) |
| 3”Entry Boot | 1-3/64” (26.5mm) |
| 4”Entry Boot | 1-3/64” (26.5mm) |
Dimensions
Order Info
Electrofusion Fiberglass Entry Boots
Additional Electrofusion fittings are required to complete the installation of these boots. See the Electrofusion Fiberglass Entry Boot Ordering Guide for details.
| Model | Description |
|---|---|
| 1137205 | Spare adhesive kit (50 ML cartridge w/ nozzle) |
| FEB-075-M | 2" electrofusion fiberglass entry boot for use with 2" pipework |
| FEB-110-M | 3" electrofusion fiberglass entry boot for use with 3" pipework |
Pipe Slope Wedges
| Model | Description |
|---|---|
| 10000009091 | ¼" Pipe Slope Wedge (2), for use with 2" Electrofusion Fiberglass Entry Boots |
Ordering Guide
Downloads
Brochures
| Title | Type | Size | |
|---|---|---|---|
| FFS-0279 Electrofusion Fiberglass Entry Boot Datasheet.pdf | 0.75 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
| FFS-0807 (EN) Product Catalogue.pdf | 153.77 MB | ||
| FFS-0367 (UL) Site Starters Ordering Guide.pdf | 64.42 MB | ||
| FFS-1028 2025 UL Ordering Catalog.pdf | 95.28 MB |
Manuals
| Title | Type | Size | |
|---|---|---|---|
| 408076001 Fiberglass Sump Entry Seal Install Guide.pdf | 4.08 MB |
Drawings
| Title | Type | Size | |
|---|---|---|---|
| CD_PC_FEB-125-M_001.pdf | 0.57 MB | ||
| CD_PC_FEB-125-M_001.dwg | DWG | 3.12 MB | |
| CD_PC_FEB-110-M_001.dwg | DWG | 1.62 MB | |
| CD_PC_FEB-110-M_001.pdf | 0.12 MB | ||
| CD_PC_FEB-075-M_002.pdf | 0.13 MB | ||
| CD_PC_FEB-075-M_002.dwg | DWG | 0.64 MB |