Clamshell Non-Swivel Tee & Elbow

Clamshell Non-Swivel Tee & Elbow

Installing APT™ brand XP flexible pipe inside of a narrow-base dispenser sump has never been easier. The XP pipe clamshell tee and elbow fittings allow for an easy space-saving installation by enabling an installer to connect flexible pipe directly into a shear valve riser. This eliminates the need for extra galvanized fittings. By eliminating the galvanized fittings, you also reduce the amount of potential leak points, giving you peace of mind that your installation is secure. With the tee and elbow fittings you can complete an XP pipe installation inside of a sump in less than 16” of linear space. The stainless steel design of the fittings makes them an ideal solution for any fueling application.

Highlights


  • Ideal for retrofit installations where containment sump has limited space or a narrow base.
  • Eliminate threaded pipe joints inside of containment space; freeing up valuable space in tight quarters.
  • Solid stainless steel construction.
  • E-coated clamps provide durability and corrosion resistance from gas/alcohol blends (including E85), diesel and biodiesel.
  • NPT threads are compatible with locally available standard termination fittings.
  • 100 psi rated working pressure.
  • Stainless steel fittings are biofuel approved (E85 and biodiesel).

Specifications


Approvals & Certifications

UL971 and CAN/ULC-S679 listed

Fuel Compatibility

UL971 and CAN/ULC-S679 listed for fuels including:

Motor vehicle fuels typically found in consumer dispensing facilities like gasoline or diesel including blended fuels with maximum 15% MTBE, 15% Methanol or 30% Ethanol.

Concentrated fuels such as alternate unblended fuels containing up to 100% concentrations of Toluene, Methanol or Ethanol.

High blend fuels with higher than normal gasoline blends with maximum 50% Methanol or 50% Ethanol.

Aviation and marine specialty fuels containing up to 100% kerosene or leaded gasoline.

Ethanol Blends Compatibility

High-blend ethanol, with ethanol/gasoline blends between 51% - 83% (E51 - E83) - commercially known as “E-85”

Biodiesel Compatibility

Biodiesel up to 5% (B5)

Biodiesel up to 20% (B20)

Biodiesel at 97% - 100% (B99 / B100) with stainless steel fittings only

All ASTM defined biofuel  blends with stainless steel fittings only

 

Order Info


Model Description
ELB-XP-150 Stainless steel XP pipe clamshell elbow fitting, installs on the end of 1½" single/secondary contained XP pipe with 1½" NPT
ELB-XP-175 Stainless steel XP pipe clamshell elbow fitting, installs on the end of 1¾" single/secondary contained XP pipe with 1½" NPT
ELB-XP-200 Stainless steel XP pipe clamshell elbow fitting, installs on the end of 2" single/secondary contained XP pipe with 1½" NPT
TEE-XP-150 Stainless steel XP pipe clamshell tee fitting, installs on the end of 1½" single/secondary contained XP pipe with 1½" NPT
TEE-XP-175 Stainless steel XP pipe clamshell tee fitting, installs on the end of 1¾" single/secondary contained XP pipe with 1½" NPT
TEE-XP-200 Stainless steel XP pipe clamshell tee fitting, installs on the end of 2" single/secondary contained XP pipe with 1½" NPT