Quick Release
Quick Release
XP Pipe quick release fittings bring a new level of ease to APT™ brand XP pipe installation and servicing. These installer-friendly fittings combine the clamping system found on the original XP Pipe clamshell fittings with the capability to connect seamlessly with flexible connectors utilizing a clamp and gasket. Installations are made easier than ever with the removal of additional threaded connections. The flange and clamp also allow for quick disconnection of the pipe from a submersible pump for easy servicing.
Highlights
- Utilize any standard flexible connector’s gasket and clamp to easily connect to the XP Pipe quick release fitting’s standard flanged edge.
- Solid stainless steel construction.
- E-coated clamps provide durability and corrosion resistance from gas/alcohol blends (including E85), diesel and biodiesel.
- 100 psi rated working pressure.
- Stainless steel fittings are biofuel approved (E85 and biodiesel).
- Compact 2.85” fitting height.
Specifications
|
Approvals & Certifications |
UL971 and CAN/ULC-S679 listed |
|
Fuel Compatibility |
UL971 and CAN/ULC-S679 listed for fuels including: Motor vehicle fuels typically found in consumer dispensing facilities like gasoline or diesel including blended fuels with maximum 15% MTBE, 15% Methanol or 30% Ethanol. Concentrated fuels such as alternate unblended fuels containing up to 100% concentrations of Toluene, Methanol or Ethanol. High blend fuels with higher than normal gasoline blends with maximum 50% Methanol or 50% Ethanol. Aviation and marine specialty fuels containing up to 100% kerosene or leaded gasoline. |
|
Ethanol Blends Compatibility |
High-blend ethanol, with ethanol/gasoline blends between 51% - 83% (E51 - E83) - commercially known as “E-85” |
|
Biodiesel Compatibility |
Biodiesel up to 5% (B5) Biodiesel up to 20% (B20) Biodiesel at 97% - 100% (B99 / B100) with stainless steel fittings only All ASTM defined biofuel blends with stainless steel fittings only |
Order Info
| Model | Description |
|---|---|
| 407046001 | Quick release clamp Flourocarbon gasket |
| 407082001 | Quick release clamp |
| QRS-XP-150-200 | Stainless steel XP pipe quick release fitting, installs on the end of 1½" single/secondary contained XP pipe with 2" flange |
| QRS-XP-175-200 | Quick release fitting for 1¾" APT® XP Pipe |
| QRS-XP-200-200 | Stainless steel XP pipe quick release fitting, installs on the end of 2" single/secondary contained XP pipe with 2" flange |
Downloads
Featured Downloads
Brochures
| Title | Type | Size | |
|---|---|---|---|
| FFS-0719_APT_Pipework_System.pdf | 15.34 MB | ||
| FFS-0283 XP Pipe Fittings Datasheet.pdf | 0.74 MB |
Catalogs
| Title | Type | Size | |
|---|---|---|---|
| FFS-0807 (EN) Product Catalogue.pdf | 153.77 MB | ||
| FFS-0367 (UL) Site Starters Ordering Guide.pdf | 64.42 MB | ||
| FFS-1028 2025 UL Ordering Catalog.pdf | 95.28 MB |
Drawings
| Title | Type | Size | |
|---|---|---|---|
| CD_PC_407046001_001.dwg | DWG | 0.08 MB | |
| CD_PC_407046001_001.pdf | 0.02 MB | ||
| CD_PC_407082001_001.dwg | DWG | 0.22 MB | |
| CD_PC_407082001_001.pdf | 0.05 MB | ||
| CD_PC_QRS-XP-150-200_001.dwg | DWG | 0.09 MB | |
| CD_PC_QRS-XP-150-200_001.pdf | 0.03 MB | ||
| CD_PC_QRS-XP-175-200_001.dwg | DWG | 0.09 MB | |
| CD_PC_QRS-XP-175-200_001.pdf | 0.03 MB | ||
| CD_PC_QRS-XP-200-200_001.dwg | DWG | 0.09 MB | |
| CD_PC_QRS-XP-200-200_001.pdf | 0.03 MB |