Defender Series®

Overfill Prevention Valve

Defender Series®

Overfill Prevention Valve

The Defender Series® Overfill Prevention Valve (OPV) prevents the overfill of an underground storage tank during a gravity-fed product delivery. It employs a revolutionary magnetically-coupled actuator system to provide positive shutoff. This unique method of shutoff eliminates any penetrations in the valve, making it both vapor and leak tight. This also allows for remote compliance testing of the primary functionality at grade level without having to remove the OPV from the tank.

Highlights


MAINTENANCE-FRIENDLY OVERFILL PREVENTION

The Defender Series® OPV is a high-performance overfill prevention solution that delivers reliable shutoff and simplifies compliance testing from grade level.

Provides safe, rapid, & reliable fuel drops


For direct, remote, & coaxial fuel drop applications


Functionality & shutoff confirmation test without tank pull


Zero body penetrations eliminates product / vapor leaks


Primary shutoff between 85% and 92% of tank volume


Accommodates a range of flow rates from 25 to 370 gpm

 

Simple roll crimp-and-thread drop tube installation


Includes 4" top and bottom drop tubes in various lengths


Compatible with gas, alcohol blends, diesel, & Biodiesel


Factory tested for 100% vapor tightness


UL & ULc listed, CARB certified (VR-101-U & VR-102)


ATEX approved, EN13616 & KIWA certified

 

Defender Series OPV Adjustable Adapter Wide-26.psd
THE BENEFITS OF THE DEFENDER SERIES® OPV

From the day it's installed through every inspection after that, the Defender Series® OPV is designed to simplify testing, reduce overall service time, and lower the risk of downtime, while minimizing maintenance and operating costs.

OPV-Icon-Install-26.psd

 

There’s no flaring, riveting, or messy epoxying of drop tubes on site. The Defender Series® OPV utilizes an error proof roll crimp-and-thread installation method to achieve a fast and easy in-line installation.

OPV-Icon-Compliance-26.psd

 

Unlike other OPVs, the Defender Series® does not have to be pulled out of the UST to conduct the mandatory 95% tank volume shutoff confirmation test every three years. That’s hassle-free compliance with no risk of damaging equipment or extended shutdowns.

OPV-Icon-Inspection-26.psd

 

The magnetically-coupled actuator system along with the testing tool allows for primary functionality testing of the OPV from grade level by a single person without having to remove the entire assembly from the riser. 

Defender Series OPV Kit Wide-26.psd
DESIGN FEATURES

Built for the way fueling operations function, the Defender Series® OPV makes every stage easier, from first install to routine checks.

Defender Series OPV Feature - Operation-26.psd

VALVE OPERATION

The revolutionary magnetically-coupled actuator system allows the Defender Series® OPV to achieve positive shutoff without a single penetration in the valve body. Minimal flow path obstructions accommodate both high and low flow fuel drops.

A As the liquid level in the UST approaches 95% capacity, the liquid level raises the float
B As the float rises it rotates the magnetic-coupled actuator to release the flapper inside the valve
C With the flapper in the open position, minimal flow path obstructions accommodate high flow drops
D The flapper is pushed into the product flow, actuating the primary shutoff position and restricting flow to less than 8 5pm
E As the float continues to rise to the 95% fill level, the secondary shutoff closes, completely stopping the flow of fuel

 

SIMPLE INSTALLATION

Gone are the days flaring, riveting, and epoxying drop tubes on site. The Defender Series® OPV utilizes an error proof roll-crimp and thread installation method to achieve a perfectly in-line installation.

 

Defender Series OPV Feature - Top Adapter-26.psd

Top Adapter

After cutting to length in the field, the upper drop tube is roll-crimped onto a top adapter and then threaded onto the top of the valve body.

Defender Series OPV Feature - Threaded-26.psd

Threaded Connections

The bottom drop tube is cut in the field and threaded onto the bottom of the valve ensuring straight installation.

Defender Series OPV Feature - In-Line-26.psd

In-Line Assembly

The roll-crimp & thread method ensures proper alignment of the drop tubes with the rest of the OPV assembly, making installation and removal of the assembly smooth.

Defender Series OPV Feature - Remote Testing-26.psd

UST COMPLIANCE TESTING

EPA regulations (40 CFR Part 280) require OPVs to be inspected every 3 years to ensure they activate at the correct tank level (95% capacity) and function properly. The magnetically-coupled actuator system along with a testing tool allows for primary functionality testing of the OPV at grade level without having to remove the entire assembly from the riser. 

No Tank Removal

The Defender Series® OPV does not have to be pulled from the tank to conduct a functionality or tank shutoff volume confirmation test.


Functionality Testing

Fast visual inspection can be conducted by a single person. The remote testing tool will actuate the flapper when inserted down the drop tube and slid by the actuator — this is confirmed visually through a window in the tool.


Collapsible Remote Testing Tool

To accommodate varying tank sizes, the testing tool handle is segmented into six sections up to 11 feet (3.35 meters) long.

Defender Series OPV Feature - Adjustable Adapter-26.psd

ADJUSTABLE ADAPTER

The Defender Series®  Adjustable Drop Tube Adapter for OPV provides precise, post-installation control of valve shutoff position, allowing installers to fine-tune OPV depth by ±1 inch after drop tubes have been cut and installed. This flexibility helps maximize tank fill levels, while supporting proper tank-volume shutoff operation and compliance with local and UST fill-level regulations.

Maximize Tank Capacity

With the ability to precisely adjust shutoff level, operators can maximize their usable tank fuel capacity, reduce lost storage volume, and optimize every fuel drop.


Ensure Compliance

The adjustable adapter design enables accurate installation of the OPV at the required height from the start, helping contractors meet UST regulations on the first installation and eliminating rework, compliance risk, or costly downtime.


Easy Retrofit Upgrade

Upgrading cost is minimized as the adapter can be easily retrofitted to the existing upper drop tube without replacing.

DOWNLOAD THE GUIDE

Defender Series® Service Station Hardware

Specifications


Approvals/Certifications

  • CARB certified, VR-101-U (FFS) and VR-102 (OPW®).
  • ATEX 2014/34/EU approved.
  • EN13616 certified.
  • KIWA BRL-K636/03 certified.
  • UL 2583 listed and ULc listed, MH21090.
  • For all vapor control and liquid control products covered by UL 2583 automotive fuels, only those fuels formulated in accordance with 40CFR80, "Regulation of Fuels and Fuel Additives," and meeting the following ASTM fuel specifications and blend limits:
    • ASTM D975 diesel with or without biodiesel blends up to 5% (B5)
    • ASTM D7467 diesel with biodiesel blends between 6% - 20% (B6 - B20)
    • ASTM D4814 gasoline with ethanol blends up to 10% (E10)
    • ASTM D4814 and ASTM D5798 mid-range ethanol/gasoline blends of (E11-50)
    • ASTM D5798 high-range ethanol/gasoline blends (E51-83)-Commercially sold as E85
    • Isobutanol Fuel Blends (max iBu16) of ASTM D4814 Gasoline (E0) and ASTM D7862 Butanol (2-methyl-1-propanol isomer)
  • In addition to Ul 2583 listed fuels, the following fuels are also compatible:
    • Biodiesel up to 5% B5
    • Biodiesel up to 20% B20
    • Biodiesel at 97%-100% B99/B100
    • All ASTM Biofuel blends
  • Alcohol, gas, biofuel compatible (E-85, gasoline and biodiesel) models come with hard coated anodized drop tubes for full compatibility. 

Components

  1. Pre-flanged aluminum top drop tube
  2. Roll-crimped top fitting/drop tube
  3. Protective float sleeve
  4. Float (shielded by float sleeve)
  5. Valve Assembly
  6. Magnetically-coupled actuator
  7. Threaded bottom drop tube
defender_opv_install_dims.psd

Dimensions

defender_opv_dims.psd

Operation

The OPV is designed with a primary shutoff that will activate between 85% and 92% of tank volume, depending on tank diameter. After the primary shutoff is actuated the flow through the valve is limited to less than 30 lpm 8 gpm (30 lpm). A secondary positive shutoff will occur at 95% tank volume if filling continues. As the liquid level in the UST approaches 95% capacity, the liquid level raises the float. As the float rises it actuates the external/internal magnetic couplers which release the flapper to be closed by the flow of product. As the float continues to rise, the internal mechanism pushes the flapper further into the product flow to allow actuation at high or low flow rates. This sudden reduction in flow caused by the primary flapper closing creates "line shock" to the fill hose which signals the delivery driver that the tank is nearing 95% capacity. As the float continues to rise to the 95% fill level, the secondary closes, completely stopping the flow of fuel.

Order Info


Defender Series® Overfill Prevention Valve

Model Description
708691901 Defender Series® overfill prevention valve with 5' (1524mm) top drop tube, 8' (2438mm) bottom drop tube
708691902 Defender Series® overfill prevention valve with 5' (1524 mm) top drop tube, 10' (3048 mm) bottom drop tube
708691921 Defender Series® overfill prevention valve with 5' (1524 mm) top drop tube, 8' (2438 mm) bottom drop tube, AGB compatible*
708691922 Defender Series® overfill prevention valve with 5' (1524 mm) top drop tube, 10' (3048 mm) bottom drop tube, AGB compatible*
708692901 Defender Series® overfill prevention valve with 10' (3048 mm) top drop tube, 8' (2438 mm) bottom drop tube
708692902 Defender Series® overfill prevention valve with 10' (3048mm) top drop tube, 10' (3048mm) bottom drop tube
708692921 Defender Series® overfill prevention valve with 10' (3048 mm) top drop tube, 8' (2438 mm) bottom drop tube, AGB compatible*
708692922 Defender Series® overfill prevention valve with 10' (3048 mm) top drop tube, 10' (3048 mm) bottom drop tube, AGB compatible*
708693901 Defender Series® overfill prevention valve, coaxial with 6.5' (1981 mm) top drop tube, 8' (2438 mm) bottom drop tube
708693902 Defender Series® overfill prevention valve, coaxial with 6.5' (1981 mm) top drop tube, 10' (3048 mm) bottom drop tube
708693923 Defender Series® overfill prevention valve, poppeted coaxial with 6.5' (1981 mm) top drop tube, 8' (2438 mm) bottom drop tube, AGB compatible*
708693924 Defender Series® overfill prevention valve, poppeted coaxial with 6.5' (1981 mm) top drop tube, 10' (3048 mm) bottom drop tube, AGB compatible*
708694901 Defender Series® overfill prevention valve only with top and bottom adapter, AGB compatible
708694902 Defender Series® overfill prevention valve only with coaxial top adapter, AGB compatible*

Defender Series® Overfill Prevention Valve with Adjustable Adapter

Model Description
708691903 Defender Series® overfill prevention valve with 5 ft (1,234 mm) top drop tube, 8 ft (2,438 mm) bottom drop tube, with adjustable drop tube adapter
708691904 Defender Series® overfill prevention valve with 5 ft (1,234 mm) top drop tube, 10 ft (3,048 mm) bottom drop tube, with adjustable drop tube adapter.
708691923 Defender Series® overfill prevention valve with 5 ft (1,234 mm) top drop tube, 8 ft (2,438 mm) bottom drop tube, with adjustable drop tube adapter, ABG compatible*
708691924 Defender Series® overfill prevention valve with 5 ft (1,234 mm) top drop tube, 10 ft (3,048 mm) bottom drop tube, with adjustable drop tube adapter, ABG compatible*
708692903 Defender Series® overfill prevention valve with 10 ft (3,048 mm) top drop tube, 8 ft (2,438 mm) bottom drop tube, with adjustable drop tube adapter
708692904 Defender Series® overfill prevention valve with 10 ft (3,048 mm) top drop tube, 10 ft (3,048 mm) bottom drop tube, with adjustable drop tube adapter
708692923 Defender Series® overfill prevention valve with 10 ft (3,048 mm) top drop tube, 8 ft (2,438 mm) bottom drop tube, with adjustable drop tube adapter, ABG compatible*
708692924 Defender Series® overfill prevention valve with 10 ft (3,048 mm) top drop tube, 10 ft (3,048 mm) bottom drop tube, with adjustable drop tube adapter, ABG compatible*
708693901 Defender Series® overfill prevention valve, coaxial with 6.5' (1981 mm) top drop tube, 8' (2438 mm) bottom drop tube
708693902 Defender Series® overfill prevention valve, coaxial with 6.5' (1981 mm) top drop tube, 10' (3048 mm) bottom drop tube
708693923 Defender Series® overfill prevention valve, poppeted coaxial with 6.5' (1981 mm) top drop tube, 8' (2438 mm) bottom drop tube, AGB compatible*
708693924 Defender Series® overfill prevention valve, poppeted coaxial with 6.5' (1981 mm) top drop tube, 10' (3048 mm) bottom drop tube, AGB compatible*
708694902 Defender Series® overfill prevention valve only with coaxial top adapter, AGB compatible*
708694903 Defender Series® overfill prevention valve only with adjustable drop tube adapter, ABG compatible*
708526904 Defender Series® adjustable drop tube adapter, ABG compatible**
  • *Alcohol, gas, biofuel compatible (E-85, gasoline and Biodiesel) models come with hard coated anodized drop tubes for full compatibility.

Downloads


Drawings

Title Type Size
CD_SSH_708534901_001.pdf PDF 0.1 MB
CD_SSH_708534901_001.dwg DWG 3 MB
CD_SSH_70869X9XX_001.pdf PDF 0.05 MB
CD_SSH_70869X9XX_001.dwg DWG 0.37 MB
CD_SSH_708591902_001.stp STP 24.24 MB
CD_SSH_7085909XX_001.dwg DWG 0.4 MB
CD_SSH_7085909XX_001.pdf PDF 0.03 MB

Assets

Defender Series OPV Product Spotlight
Defender Series™ Overfill Prevention Valve Installation
Defender Series™ Overfill Prevention Valve Inspection

Part/Accessories


Roll Crimping Tool

Model Description
708530930 Replacement roll crimper tool roller bit for retrofit with existing tool
708535901 Roll crimping tool
CW1 Cutting Wheel for P.CUT & P.CUT MED

Remote Testing Tool

Model Description
708534901 Remote testing tool, 11' (3353mm) long sectional/collapsible
708534902 Coaxial remote testing tool, 11 ft (3,353 mm) long sectional/collapsible

Replacement Parts

Model Description
1103942 Spare adapter O-ring
1103943 Spare Coaxial adapter O-ring
70821705 5' flanged top drop tube; order in multiples of 4
70821725 5' flanged top drop tube, AGB compatible; order in multiples of 4
708526901 Upper tube adapter kit
708526904 Defender Series® adjustable drop tube adapter, ABG compatible**
708529901 Coaxial Upper tube adapter kit
708542908 8' thread-on bottom drop tube assembly, 2-pk
708542910 10' thread-on bottom drop tube assembly, 2-pk
708542910AN 10' thread-on bottom drop tube assembly, 2-pk, AGB compatible
708542908AN 8' thread-on bottom drop tube assembly, 2-pk, AGB compatible
85039-DT Spare drop tube seal